滚球体育

产品中心您当前的位置:滚球体育 > 产品中心 > ADCMT爱德万ADVANTEST > 直流电源/恒流电流源 > 日本爱德万直流电源ADCMT6242

基础信息Product information

CHANPINMINGCHENG:RIBENAIDEWANZHILIUDIANYUANADCMT6242

CHANPINXINGHAO:

GENGXINSHIJIAN:2016-10-20

CHANPINJIANJIE:

滚球体育 RIBENAIDEWANZHILIUDIANYUANADCMT6242, ZHONGGUODIANZIXINGYEYIQIYOUZHIGONGYINGSHANG——JIANRONGSHIYEJETYOO INDUSTRIAL & JIANYOU(SHANGHAI)CELIANGYIQIJETYOO INSTRUMENTS,ZHUANYEWEIZHONGGUOQUYONGHUTIGONGSupport、XIAOSHOUSale、FUWUService

产品特性Product characteristics

    中国电子行业仪器优质供应商——坚融实业JETYOO INDUSTRIAL & 坚友(上海)测量仪器JETYOO INSTRUMENTS,专业为中国区用户提供仪器设备、技术培训与售后维修服务,Support、销售Sale、服务Service,3S公司,为上海华东地区一家以技术为导向的仪器综合服务商,是您值得信赖的电子行业仪器专家。


直流电压电流源日本爱德万直流电源ADCMT6242产品概述
6242,发生41/2数字,在测量51/2位数字,是测量电源基本精度为±0.02%的高准确度的表现。
传统的线性,Fikusudo和随机扫描,新除了添加到斜率线性扫描(扫到中途步骤值切换),则zui小脉冲宽度为50μs的脉冲测量功能,zui小分辨率,1μV/100pA减小电压由电流测量,在研究和半导体等电子元器件的发展的评估和生产线的特性试验,可以使用范围很广。
到电池和电源IC的评价,能够吸收双极性输出,高/低限单个设置功能,是有效的暂停功能,在这里你可以选择zui佳的输出OFF状态。
滚球体育外部接口,USB除了GPIB是标准的。


日本爱德万直流电源ADCMT6242产品特点
各种各样的生成和测量功能
电压:0?±6V电流:0?±5A
高分辨率的产生和测量分辨率
发生分辨率:10μV/1nA的测量分辨率:1μV/100pA减
基本精度±一代,测量0.02%
zui小脉冲宽度为50μs,分辨率为1μs的脉冲测量
配备了新的功能,坡线性扫描
可吸收双极性输出
滚球体育配备GPIB/ USB作为外部接口

DC Voltage Current Source/Monitor Key Facts
6242 is DC voltage and current source/monitor with high-performance features including source resolution of 4½ digits, measuring resolution of 5½ digits, and a basic accuracy of 0.02%. It supplies/measures 0 to ±6 V / 0 to ±5 A and enables extensive pulse generation and measurement functions including sweep and pulsed sweep. 6242 can generate pulse widths down to 50µs and can measure with a resolution down to 1µV/100pA. So this product can be used for a wide range of applications, e.g. as a power source for evaluations in research and development of semiconductors and other electronic components, or as a power source for a production line characteristic test system. 6242 is very well suited for the evaluation of solar cell characteristics. At the same time, the individual HI/LO limiter setting function demonstrates its power in evaluation of batteries and power source ICs. Its suspend function enables the selection of the optimal OFF state depending on the specific requirement of each application. 6242 is equipped with GPIB and USB interface in standard.


,Features & Benefits
0 to ±6 V / 0 to ±5 A
4-quadrant supply with positive and negative output voltages, even useable as DC sink
applicable as voltage source or as real current source
source and measurement with a basic accuracy of ±0.02%
high resolution in source (10 µV/1 nA) and measurement (1 µV/100 pA)
fast sample and waveform buffer (8000 data)
pulse generation and measurement with minimum pulse width of 50 µs
minimum pulse period: 500 µs
lowest ripple & noise
DC and pulse sweep with fixed/linear/random and two-slope linear functions
fast generation mode switching
individual settings of HI and LO limits
suspend function with different output OFF states (STBY/ HiZ / LoZ)
settable suspend voltage to prevent battery discharge
R measurement in CV or in CC mode
precise timing at pulse generation and definition of the measurement window
comfortable trigger and synchronisation capabilities of multiple units and with other instruments
programmable comparator limits
scaling calculation of measurement results
automatic “Null Calculation” for cancelling of offset values
parallel and serial operation of several units possible
settling time 30 µs (in FAST response mode)
additional S&H mode for short pulse measurements
GPIB and USB interfaces

Specifications 6242A

Voltage Source/Measurement Range
RangeSource RangeSetting ResolutionMeasurement RangeMeasurement Resolution
300 mV0 to ±320.00 mV10 µV0 to ±320.999 mV1 µV
3 V0 to ±3.2000 V100 µV0 to±3.20999 V10 µV
6 V0 to ±6.000 V1 mV0 to±6.0999 V100 µV
Line regulation:±0.003% of range or less
Load regulation:±0.003% of range or less (at 4-wire connection with maximum load)
Current Source/Measurement Range
RangeSource RangeSetting ResolutionMeasurement RangeMeasurement Resolution
30 µA0 to ±32.000 µA1 nA0 to ±32.0999 µA100 pA
300 µA0 to ±320.00 µA10 nA0 to ±320.999 µA1 nA
3 mA0 to ±3.2000 mA100 nA0 to ±3.20999 mA10 nA
30 mA0 to ±32.000 mA1 µA0 to ±32.0999 mA100 nA
300 mA0 to ±320.00 mA10 µA0 to ±320.999 mA1 µA
3 A0 to ±3.000 A100 µA0 to ±3.00999 A10 µA
5 A0 to ±5.000 A200 µA0 to ±5.00999 A10 µA
Resistance Measurement Range
 Measurement RangeMeasurement Resolution
Determined by the operation of Voltage range/Current range0 Ω to 304 MΩMinimum 0.2 µΩ
Output Noise
For voltage source within the range from no load to maximum load [Vp-p]
Voltage Source:
RangeLoad resistanceLow Frequency NoiseHigh Frequency Noise
  DC to 100HzDC to 10kHzDC to 20MHz
300 mV-50µV200µV3mV
3 V-50µV300µV3mV
30V/6V-500µV2mV4mV
General Source/Measurement Functions
DC Source/MeasurementSource/measurement of DC voltage/current
Pulse Source/MeasurementSource/measurement of pulse voltage/current (However, measurement auto range in pulse source is impossible.)
DC Sweep Source/MeasurementSource/measurement with linear, two-slope linear, random and fixed level.
Pulse Sweep Source/MeasurementSource/measurement with linear, two-slope linear, random and fixed level.
 (However, measurement auto range in pulse source is impossible.)
Integration Time100µs, 500µs, 1ms, 5ms, 10ms, 1PLC, 100ms,
 200ms, or S/H
 S/H: Measuring in Sample & Hold Mode (Integration time: 100µs), (Enabled only in pulse source and pulse sweep source modes.)
 PLC: Power Line Cycle:
 50Hz:20ms 60Hz:16.66ms
Sweep ModeReverse ON/OFF (forward to backward / one way)
Sweep Repeat Time1 to 1000 times, or infinite
Number of Sweep Maximum Step8000 steps
Random Sweep Maximum Memory8000 data
Measurement Data Memory8000 data
Measurement Auto RangeAvailable only in VSIM or ISVM
Measurement Function Link ModeLinks the source function to the measurement function (VSIM or ISVM) ON/OFF available
LimiterPossible to set separay at HI or LO sides (However, in case of current limiter, the same polarity can not be set.)
Calculation FunctionsNULL calculation
 Comparator calculation (HI/GO/LO)
 Scaling calculation
 MAX/MIN/AVE/TOTAL calculation
Trigger StyleAuto-Trigger, external Trigger
Output TerminalFront; Safety sockets,
 HI OUTPUT, HI SENSE, LO OUTPUT, LO SENSE
Maximum Input Voltage between TerminalsR6242A: 6V peak MAX (between HI and LO)
 2V peak MAX /(between OUTPUT and SENSE)
 250V MAX (between LO and chassis)
Maximum Remote Sensing Voltage± 1V MAX
 between HI OUTPUT and HI SENSE
 between LO OUTPUT and LO SENSE
 (The voltage between HI SENSE and LO SENSE must be within the maximum output voltage range)
GPIB InterfaceCompliant with IEEE-488.2-1987
 Interface functions: SH1, AH1,T5, L4, SR1, RL1, PP0, DC1, DT1, C0, E2
 Connector: Amphenol 24 pin
USB InterfaceUSB 2.0 Full-Speed; Connector Typ B
External Control SignalTRIGGER IN,
 INTERLOCK, OPERATE IN/OUT, COMPLETE OUT, SYNC OUT
General Specification
Power Supply:AC power 100V, 120V, 220V, 240V (switchable by user)
Line Frequency:50Hz/60Hz
Power Consumption:6242: 180VA or less
Dimensions:Approx. 212(W) x 88(H) x 400(D) mm
Mass:6242: 6.5kg or less
Safety:IEC 61010-1
EMI:EN1326 class A


直流電圧?電流源/モニタ6242製品概要
6242は、発生41/2桁、測定51/2桁で、基本確度が±0.02%の高確度の性能を持った計測電源です。
従来のリニア、フィクスド、ランダム掃引と、新た にツー?スロープ?リニア掃引(ステップ値を途中切り換える掃引)の追加に加え、zui小パルス幅50μsのパルス測定機能、zui小分解能が1μV/100pAの微少電圧?電流測定により、半導体やその他電子 部品の研究?開発での評価や生産ラインでの特性試験に、幅広くお使いいただけます。
バッテリや電源用ICの評価に、シンク可能なバイポーラ出力、HI/LOリミッタ個別設定機能、およびzui適な出力OFF状態を選択できるサスペンド機 能が有効です。
滚球体育外部インタフェースは、GPIBに加えUSBが標準装備されています。


直流電圧?電流源/モニタ6242特長
広範囲な発生?測定機能
電圧:0~±6V 電流:0~±5A
高分解能の発生?測定分解能
発生分解能:10μV/1nA 測定分解能:1μV/100pA
基本確度±0.02%の発生、測定
zui小パルス幅50μs、分解能1μsのパルス測定
ツー?スロープ?リニア?スイープの新機能を搭載
シンク可能なバイポーラ出力
外部インタフェースとしてGPIB/USBを標準装備


電圧電流発生器
   型名          製品名称                 説明
日本ADCMT6146電圧電流発生器        4 1/2桁広いダイナミック?レンジ機器の校正、二次電池の擬似電源に
日本ADCMT6156電圧電流発生器        5 1/2桁広いダイナミック?レンジ熱電対起電力出力も可能
日本ADCMT6166電圧電流発生器        6 1/2桁 高安定?高確度のバイポーラ出力の標準電源
日本ADCMT6240A電圧電流発生器          51/2桁の測定と4Aのパルス発生の直流電圧?電流源/モニタ
日本ADCMT6240B電圧電流発生器        51/2桁の測定で、半導体試験や接触抵抗試験を高精度に計測可能
日本ADCMT6241A直流電圧電流源モニタ  基本確度±0.02%、zui小50μsパルス発生?測定ができる高性能な計測電源
日本ADCMT6242直流電圧電流源モニタ        基本確度±0.02%、zui小50μsパルス発生?測定ができる高性能な計測電源
日本ADCMT6243電圧電流発生器     5 1/2桁(±320000)測定とパルス幅1msのパルス測定機能
日本ADCMT6244電圧電流発生器    フレキシブルな発生と測定で電子回路(部品)評価にzui適な直流電圧?電流源/モニタ
日本ADCMT6245,日本ADCMT6246電圧電流発生器      2チャンネルを同一タイミングで測定する同期測定機能搭載
日本ADCMT6247C,日本ADCMT6247G直流電圧電流源モニタ     LEDモジュールや高電圧半導体評価にzui適
日本ADCMT6501マルチチャンネル直流電圧電流源モニタ        電子部品の生産ラインや品質管理にzui適な4チャンネルのソース/モニタ


日本ADCMT爱德万ADVANTEST直流电源系列产品
   型号       产品名称        说明
日本爱德万直流电源ADCMT6146电压电流发生器              41/2位宽校准动态范围的装置,所述二次电池的所述伪电力
日本爱德万直流电源ADCMT6156电压电流发生器            51/2位动态范围宽热电TaiOkoshi功率输出也可能
日本爱德万直流电源ADCMT6166电压标准电源/电流发生器      61/2位的稳定性和高精度双极性输出
日本爱德万直流电源ADCMT6240A电压发电机                2分之51位测量和4A的脉冲发生器的直流电压和电流源/监视器的当前
日本爱德万直流电源ADCMT6240B电压电流发生器          51/2数字的测量,可以测量半导体测试和接触电阻测试以高精确度
日本爱德万直流电源ADCMT6241A直流电压和电流源监控      基本精度±0.02%,高性能的测量能力,能够zui小为50μs脉冲生成和测量
直流电压和电流源监控      基本精度±0.02%,高性能的测量能力,能够zui小为50μs脉冲生成和测量
日本爱德万直流电源ADCMT6243电压电流发生器            51/2位(±320000)脉冲测量的测量功能,脉冲宽度为1ms
日本爱德万直流电源ADCMT6244电压电流发生器         灵活生成和电子电路(份)中在zui佳的直流电压和电流源/监视器的测量和评价
日本爱德万直流电源ADCMT6246/6245电压电流发生器    2的同步来测量信道在功能相同的定时测量
日本爱德万直流电源ADCMT6247C/6247G是理想的直流电压和电流源          监视器LED模块和高压半导体评价
日本爱德万直流电源ADCMT6501多路直流电压和电流源/监控电子元件生产线和zui好的四个通道,以质量管理和源/监视器

留言框

  • 产品:

  • 留言内容:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 详细地址:

  • 省份:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7

上一篇:6241A日本ADCMT直流电源

下一篇:ADCMT 6243日本爱德万ADCMT直流电压电流源/监测器

扫一扫访问手机站
访问手机站